ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
427
eth filter template config
Config a filter.
SYNTAX:
eth filter template config filter = <{}>
[location = <{Ingress|Egress|VID|Priority}>]
[level = <number{0-65535}>]
[tracing = <{disabled|enabled}>]
[mark = <{disabled|enabled}>]
where:
filter The name of an filter. REQUIRED
location The filter location. OPTIONAL
level The filter level (lower level is processed first = priority) OPTIONAL
tracing Enable/disabled tracing of packets OPTIONAL
mark Enable/disabled marking of packets OPTIONAL
To Next Page
Loading...
Need help?
General
