IP COMMANDS
586
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
ip ifwait
Wait for a status change of an IP interface.
SYNTAX:
ip ifwait intf = <{loop|ipsec0|Internet|lan1|wan1|dmz1|
guest1}>
[timeout = <number{1-600000}>]
[adminstatus = <{down|up}>]
[operstatus = <{down|up}>]
[linkstatus = <{down|up}>]
where:
intf An IP interface name. REQUIRED
timeout The timeout in seconds. OPTIONAL
adminstatus The administrative state of the interface. OPTIONAL
operstatus The operational state of the interface. OPTIONAL
linkstatus The link state of the interface. OPTIONAL
To Next Page
Loading...
Need help?
General
