UPGRADE COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
1119
upgrade image list
List images
SYNTAX:
upgrade image list [maxage = <number{60-999999}>]
[writemode = <{full|natonly|readonly}>]
[safenat = <{disabled|enabled}>]
[preferredaddresses = <string>]
[upnpautosave = <{disabled|enabled}>]
[dslfautosave = <{disabled|enabled}>]
[autosavedelay = <number{30-45}>]
[onlydefault = <{disabled|enabled}>]
where:
maxage ssdp advertisements MAX-AGE (default = 1800) OPTIONAL
writemode Configuration access level for UPnP OPTIONAL
safenat Enable / disable check on safe nat entries (limited to own
host)
OPTIONAL
preferredaddresses CSV list of preferred ip addresses for UPnP (1 per lan ip-
interface)
OPTIONAL
upnpautosave Enable / disable upnp auto save OPTIONAL
dslfautosave Enable / disable TR-064 auto save OPTIONAL
autosavedelay Auto save delay time (sec) OPTIONAL
onlydefault Only advertise the default WAN connection OPTIONAL
To Next Page
Loading...
Need help?
General
