Technicolor TG670 User Manual

ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
469
eth switch qos config
Configure common qos parameters.
SYNTAX:
eth switch qos config state = <{enabled|disabled}>
[nbrOfQueues = <number{0-4}>]
[realtime = <{enabled|disabled}>]
[threshold = <number{0-15}>]
[rxbackpressure = <{disabled|enabled}>]
[txbackpressure = <{disabled|enabled}>]
where:
state Enable/disable QoS. REQUIRED
nbrOfQueues Number of queues. OPTIONAL
realtime Enable/disable realtime. OPTIONAL
threshold Tx Qos threshold. OPTIONAL
rxbackpressure Enable/disable controlled receive from switch (OBC pauses
Rx).
OPTIONAL
txbackpressure Enable/disable controlled transmit to switch (switch pauses
Tx).
OPTIONAL
nickdj.co.uk

Technicolor TG670 Specifications

General

Brand	Technicolor
Model	TG670
Category	Network Router
Language	English