IP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
591
ip mcast flush
Flush the multicast routing table.
SYNTAX:
ip mcast flush dest = <{atm_pvc_8_35}>
[state = <{disabled|enabled}>]
[discard = <{tail|early}>]
[priority = <{wfq|strict|wrr}>]
[realtimerate = <number{1-100}>]
[burstsize = <number{1-64}>]
[qtyrealtimequeues = <number{1-3}>]
[backgroundqueue = <{disabled|enabled}>]
[ecnthreshold = <number{1-99}>]
[weight1 = <number{1-99}>]
[weight2 = <number{1-99}>]
[weight3 = <number{0-98}>]
[weight4 = <number{0-97}>]
[weight5 = <number{0-96}>]
[maxpackets = <number{0-500}>]
[maxbytes = <number{0-256}>]
where:
dest The destination of the interface. Typically, a phonebook
entry.
REQUIRED
state Enable, disable IP QoS for the interface. OPTIONAL
discard The packet discard strategy in case of congestion. OPTIONAL
priority The subqueue priority algorithm. OPTIONAL
realtimerate The percentage of the bandwith. OPTIONAL
burstsize Burstsize in kilo bytes (KB). OPTIONAL
qtyrealtimequeues Number of real-time priority queues. OPTIONAL
backgroundqueue Enable, disable the best effort background queue. OPTIONAL
ecnthreshold The ECN marking threshold. OPTIONAL
weight1 The weight of queue 1 used for weighted fair queueing
(WFQ) or weighted round robin (WRR).
OPTIONAL
weight2 The weight of queue 2 used for weighted fair queueing
(WFQ) or weighted round robin (WRR).
OPTIONAL
weight3 The weight of queue 3 used for weighted fair queueing
(WFQ) or weighted round robin (WRR).
OPTIONAL
weight4 The weight of queue 4 used for weighted fair queueing
(WFQ) or weigthed round robin (WRR).
OPTIONAL
To Next Page
Loading...
Need help?
General
