CONNECTION COMMANDS
96
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
connection bind
Create a CONN/NAT application helper/port binding.
SYNTAX:
connection bind application = <{IP6TO4|PPTP|ESP|IKE|SIP|
JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|SNMP_TRAP|
FTP}>
[port = <port-range>]
where:
application The name of a CONN/NAT application helper as listed by
':connection applist'.
REQUIRED
port The port number or range this application handler should
work on.
OPTIONAL
To Next Page
Loading...
Need help?
General
