ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
379
eth bridge macadd
Add a static MAC address to a bridge interface.
SYNTAX:
eth bridge macadd [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt|vdsl2}>
hwaddr = <hardware-address>
[vlan = <{default|wan|dmz|guest}>]
where:
brname The name of a bridge instance. OPTIONAL
intf The name of the bridge interface. REQUIRED
hwaddr The ethernet MAC address of the new entry. REQUIRED
vlan The VLAN. OPTIONAL
To Next Page
Loading...
Need help?
General
