MEMM COMMANDS
754
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
memm debug lock traceconfig
Modify lock trace settings.
SYNTAX:
memm debug lock traceconfig [level = <number{0-4}>]
[name = <quoted string>]
[showtid = <{no|yes}>]
Import all scores. = <{no|yes}>
where:
level Select memm trace level (0-4). OPTIONAL
name application name filter for lock traces (empty displays all
lock traces)
OPTIONAL
showtid Display task IDs when hitting lock time-outs (disabled by
default)Command: mlp import
OPTIONAL
Import all scores. Syntax : import [allow_dl = <{no|yes}>] [trace = <{disabled|
enabled|full}>]
REQUIRED
SYNTAX:
memm debug lock traceconfig [allow_dl = <{no|yes}>]
[trace = <{disabled|enabled|full}>]
where:
allow_dl Enable/disable support for /dl/ folder OPTIONAL
trace Select import trace level. OPTIONAL
To Next Page
Loading...
Need help?
General
