IPSEC COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
635
ipsec connection descriptor delete
Deletes a phase 2 (IPSec) security descriptor.
SYNTAX:
ipsec connection descriptor
delete
name = <{AES_SHA1_TUN|AES_MD5_TUN|
AES_SHA1_PFS_TUN|AES_MD5_PFS_TUN|
DES_SHA1_TUN|DES_MD5_TUN|AES_SHA1_Adv_TUN|
NullEnc_SHA1_TUN}>
where:
name Security descriptor profile to delete. REQUIRED