TFTP COMMANDS
1088
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
tftp fs remove
Remove (delete) a file.
SYNTAX:
tftp fs remove file = <string>
Display/modify tls settings = <string>
where:
file File to be removed.Command: tls acs-client config REQUIRED
Display/modify tls settings Syntax : config [state = <{disabled|enabled}>] [auth-serv =
<{disabled|enabled}>] [valid-date = <{disabled|enabled}>]
[valid-domain = <{disabled|enabled}>]
REQUIRED
SYNTAX:
tftp fs remove [state = <{disabled|enabled}>]
[auth-serv = <{disabled|enabled}>]
[valid-date = <{disabled|enabled}>]
[valid-domain = <{disabled|enabled}>]
where:
state SSL/TLS client for ACS state OPTIONAL
auth-serv Request server authentication OPTIONAL
valid-date Check certificate validity date OPTIONAL
valid-domain Check certificate domain OPTIONAL