ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
395
eth bridge xtratag add
Add an extra tag mapping entry.
SYNTAX:
eth bridge xtratag add [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt|vdsl2}>
innervid = <{[1-4094]|all|}>
outervid = <{[1-4094]|notag|transparent|}>
where:
brname The name of a bridge instance. OPTIONAL
intf The name of the bridge interface. REQUIRED
innervid The inner VLAN id [all,1-4094] (all = all inner vid will be
translated to the outer vid).
REQUIRED
outervid The outer VLAN id [notag,1-4094,transparent] (notag:
outer not tagged, transparent: tagged as inner).
REQUIRED
To Next Page
Loading...
Need help?
General
