WIRELESS COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
1295
wireless acs config
ACS configuration
SYNTAX:
wireless acs config [state = <{disabled|enabled}>]
[ccathreshold = <number>]
[channelscantime = <number>]
[failiteration = <number>]
[maxiteration = <number>]
[lockoutperiod = <number>]
[periodicscantime = <number>]
[radio_id = <number{0-9999}>]
[scanmode = <{disabled|detect|detect+act}>]
[autoscanreport = <{no|yes}>]
where:
state [glitchthreshold = <number>] ACS glitsch threshold OPTIONAL
ccathreshold ACS cca threshold OPTIONAL
channelscantime ACS channelscantime OPTIONAL
failiteration ACS failiteration OPTIONAL
maxiteration ACS maxiteration OPTIONAL
lockoutperiod ACS lockout period OPTIONAL
periodicscantime ACS periodic scan OPTIONAL
radio_id radio OPTIONAL
scanmode ACS scan mode OPTIONAL
autoscanreport ACS auto scan report generation OPTIONAL
To Next Page
Loading...
Need help?
General
