UPNP COMMANDS
1124
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
upnp debug nonce
To re-generate the nonce string.
SYNTAX:
upnp debug nonce [type = <{upnp|tr64|wfa}>]
Add a user. = <{upnp|tr64|wfa}>
where:
type Specify device type for nonce stringCommand: user add OPTIONAL
Add a user.
Syntax : add name = <string> password = <password> role = <>
[hash2 = <string>] [crypt = <string>] [descr = <quoted string>]
[defuser = <{disabled|enabled}>] [defremadmin = <{disabled|
enabled}>] [deflocadmin = <{disabled|enabled}>]
REQUIRED
SYNTAX:
upnp debug nonce name = <string>
password = <password>
role = <>
[hash2 = <string>]
[crypt = <string>]
[descr = <quoted string>]
[defuser = <{disabled|enabled}>]
[defremadmin = <{disabled|enabled}>]
[deflocadmin = <{disabled|enabled}>]
where:
name User name. REQUIRED
password User password. REQUIRED
role Role name. REQUIRED
hash2 The MD5 hash. OPTIONAL
crypt The crypt password. OPTIONAL
descr User description. OPTIONAL
defuser Set this user as the default user. OPTIONAL
defremadmin Set this user as the default remote administrator. OPTIONAL
deflocadmin Set this user as the default local administrator. OPTIONAL
To Next Page
Loading...
Need help?
General
