MBUS COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
731
mbus client config
Modify client parameters
SYNTAX:
mbus client config [writelock = <{enabled|disabled}>]
[wlgetimeout = <number>]
[wlidletimeout = <number>]
[path = <quoted string>]
[type = <{indexpath|keystrpath}>]
[id = <number>]
where:
writelock Get/release mbus writelock OPTIONAL
wlgetimeout Writelock get timeout in seconds (forever=-1,
*default=nowait=0)
OPTIONAL
wlidletimeout Writelock idle timeout in seconds (forever=-1, *default=30) OPTIONAL
path Fully qualified mbus path OPTIONAL
type Path type (default = indexpath) OPTIONAL
id sessionid to use OPTIONAL