Technicolor TG670 User Manual

CWMP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
137
cwmp server config
Configure the cwmpd towards the ACS.
SYNTAX:
cwmp server config [url = <string>]
[username = <string>]
[password = <password>]
Execute a 'Trace & Debug' command. For
qualified personnel only. = <password>
where:
url Set the HTTP URL used to contact the ACS server. OPTIONAL
username Set the username for ACS Digest Authentication. OPTIONAL
password Set the password for ACS Digest
Authentication.Command: debug exec
OPTIONAL
Execute a 'Trace & Debug' command.
For qualified personnel only.
Syntax : exec cmd = <quoted string> REQUIRED
SYNTAX:
cwmp server config cmd = <quoted string>
Create a DHCP client. = <quoted string>
where:
cmd Quoted 'Trace & Debug' command stringCommand: dhcp
client ifadd
REQUIRED
Create a DHCP client. Syntax : ifadd intf = <{ipsec0|Internet|lan1|dmz1|guest1}> REQUIRED
SYNTAX:
cwmp server config intf = <{ipsec0|Internet|lan1|dmz1|guest1}>
where:
intf The name of the interface on which a DHCP Client is
defined.
REQUIRED
nickdj.co.uk

Technicolor TG670 Specifications

General

Brand	Technicolor
Model	TG670
Category	Network Router
Language	English