SNMP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
967
snmp community add
Config an SNMP community string.
SYNTAX:
snmp community add index = <string>
securityname = <string>
communityname = <password>
[context = <{""}>]
[targettag = <string>]
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
where:
index Configure a human readable string uniquely identifying an
entry in the snmpCommunityTable.
REQUIRED
securityname Configure a security name for this community string. REQUIRED
communityname Configure SNMP community string. REQUIRED
context Configure a context name. OPTIONAL
targettag Configure a string which is used to select a set of entries in
the snmpTargetAddrTable for source address checking.
OPTIONAL
storage Configure the storage type. OPTIONAL
To Next Page
Loading...
Need help?
General
