TUNNEL COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
1111
tunnel ipip add
add an ipip tunnel
SYNTAX:
tunnel ipip add ifname = <quoted string>
source = <ip-address>
destination = <ip-address>
where:
ifname the name of this ipip interface REQUIRED
source source address of outer ip header REQUIRED
destination destination address of outer ip header REQUIRED