MOBILE COMMANDS
784
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
mobile ifconfig
Configure an Mobile interface.
SYNTAX:
mobile ifconfig intf = <>
[pin = <password>]
[puk = <string>]
[apn = <string>]
[mode = <{automatic|manual}>]
[operator = <number{0-99999}>]
[technology = <{2G|3G}>]
[initcommand = <string>]
where:
intf The name of the Mobile interface to configure. REQUIRED
pin PIN code. OPTIONAL
puk PUK code. OPTIONAL
apn Access Point Name. OPTIONAL
mode Operator selection ( automatic, manual). OPTIONAL
operator Location area indentifier + network code. OPTIONAL
technology Radio access technology ( 2G, 3G). OPTIONAL
initcommand AT command executed after SIM verification. OPTIONAL
To Next Page
Loading...
Need help?
General
