ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
373
eth bridge igmpsnooping ifconfig
Configure bridge interface IGMP snooping flags and mode.
SYNTAX:
eth bridge igmpsnooping
ifconfig
[brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt|vdsl2}>
[portmode = <{Host|Router|Auto|None}>]
[fastleave = <{disabled|enabled}>]
[exptrack = <{disabled|enabled}>]
[mrdp = <{disabled|enabled}>]
[rgmp = <{disabled|enabled}>]
where:
brname The bridge instance currently to be configured. OPTIONAL
intf The bridge interface currently to be configured. REQUIRED
portmode Mode of the bridge port. OPTIONAL
fastleave Enable/Disable Fast Immediate Leave. OPTIONAL
exptrack Enable/Disable Explicit Host Tracking. OPTIONAL
mrdp Enable/Disable MRDP support. OPTIONAL
rgmp Enable/Disable RGMP support. OPTIONAL
To Next Page
Loading...
Need help?
General
