ROUTER COMMANDS
914
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
router traceconfig
Configures the global tracing options.
SYNTAX:
router traceconfig [all = <{disabled|enabled}>]
[state = <{disabled|enabled}>]
[normal = <{disabled|enabled}>]
[policy = <{disabled|enabled}>]
[task = <{disabled|enabled}>]
[timer = <{disabled|enabled}>]
[route = <{disabled|enabled}>]
[parse = <{disabled|enabled}>]
[advert = <{disabled|enabled}>]
[mio = <{disabled|enabled}>]
where:
all Enable/Disable all tracing OPTIONAL
state Enable/Disable tracing of protocol state transitions. OPTIONAL
normal Enable/Disable tracing of normal protocol occurrences. OPTIONAL
policy Enable/Disable tracing the policy functions. OPTIONAL
task Enable/Disable tracing the task changes. OPTIONAL
timer Enable/Disable tracing the timer usage. OPTIONAL
route Enable/Disable tracing the RIB table changes. OPTIONAL
parse Enable/Disable tracing the regular expression actions OPTIONAL
advert Enable/Disable tracing the advertisements OPTIONAL
mio Enable/Disable tracing the management commands OPTIONAL
To Next Page
Loading...
Need help?
General
