CONNECTION COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
93
connection appconfig
Modify a CONN/NAT application helper configuration
SYNTAX:
connection appconfig application = <{IP6TO4|PPTP|ESP|IKE|SIP|
JABBER|CU/SeeMe|RAUDIO(PNA)|RTSP|SNMP_TRAP|
FTP}>
[trace = <{disabled|enabled}>]
[timeout = <number{0-32000}>]
[childqos = <{None|DSCP|Interactive|
Management|SIPS_RTP|SIPS_SIG|Video|VoIP-RTP|
VoIP-Signal|default}>]
[floating = <{disabled|enabled}>]
[proxy = <{disabled|enabled}>]
[tracelevel = <number{1-4}>]
[snooping = <{disabled|enabled}>]
[translate-predict = <{disabled|enabled}>]
where:
application The name of a CONN/NAT application helper as listed by
':connection applist'.
REQUIRED
trace Enable/disable CONN/NAT application helper traces. OPTIONAL
timeout The maximum timeout in seconds to keep predicted child
connections around.
OPTIONAL
childqos Used QOS label for the predicted child connections. OPTIONAL
floating Enable/disabled floating port for IKE helper. OPTIONAL
proxy Enable/disable FTP proxy support. OPTIONAL
tracelevel SIP only: SIP trace level: 1=feature errors; 2=feature traces;
3=all errors; 4=all traces.
OPTIONAL
snooping SIP only: Enable/disable snooping OPTIONAL
translate-predict SIP only: Enable/disable prediction OPTIONAL
To Next Page
Loading...
Need help?
General
