Technicolor TG670 User Manual

ATM COMMANDS
60
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
atm oam cc modify
Modify CC on the connection.
SYNTAX:
atm oam cc modify port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
vpi = <number{0-31}>
[vci = <number{0-511}>]
[transmit = <{disabled|enabled}>]
[receive = <{disabled|enabled}>]
[auto = <{disabled|enabled}>]
[span = <{segment|end2end}>]
where:
port The ATM port number. REQUIRED
vpi The Virtual Path Identifier. REQUIRED
vci The Virtual Channel Identifier. OPTIONAL
transmit Enable/disable transmission of CC cells. OPTIONAL
receive Enable/disable loss of continuity. OPTIONAL
auto Enable/disable remote CC activation/deactivation. OPTIONAL
span End2end or segment continuity check. OPTIONAL
nickdj.co.uk

Technicolor TG670 Specifications

General

Brand	Technicolor
Model	TG670
Category	Network Router
Language	English