SLA COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
951
sla ping modify
Modify ping test configuration
SYNTAX:
sla ping modify test = <{IGDPing}>
[addr = <string>]
[dstport = <number{1-65535}>]
[srcport = <number{1-65535}>]
[size = <number{0-20000}>]
[timeout = <number{1-2147483646}>]
[count = <number{1-15}>]
[datafill = <quoted string>]
[frequency = <number{0-65535}>]
[maxrow = <number{0-50}>]
[storagetype = <{volatile|nonVolatile}>]
[trap = <[+/-]flag[+/-flag...]{probeFailure
testFailure testCompletion}>]
[trapprobefilter = <number{0-15}>]
[traptestfilter = <number{0-15}>]
[type = <{IcmpEcho|UdpEcho}>]
[descr = <quoted string>]
[srcaddr = <ip-address>]
[intf = <{none|loop|ipsec0|Internet|lan1|wan1|
dmz1|guest1|>]
[bypassrt = <{disabled|enabled}>]
[dsfield = <number{0-255}>]
[interval = <number{100-1000000}>]
[dontfragment = <{disabled|enabled}>]
where:
test The name of the ping test to configure. REQUIRED
addr The destination IP address. OPTIONAL
dstport The destination port. OPTIONAL
srcport The source port. OPTIONAL
size The size of the data portion to be transmitted in a ping
probe.
OPTIONAL
timeout The timeout value, in milliseconds, for a ping operation OPTIONAL
count The number of times to send a ping probe. OPTIONAL
datafill The data fill pattern of a probe packet. OPTIONAL
frequency The number of seconds to wait before repeating a ping test. OPTIONAL
maxrow The max number of entries in the history table. OPTIONAL
storagetype The storage type of this entry. OPTIONAL