ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
409
eth efm qos queue config
Configure TX Queue entry.
SYNTAX:
eth efm qos queue config intf = <{queue_e0|queue_e1|queue_e2|queue_e3|
queue_e4|queue_e5}>
[weight = <number{0-64}>]
[subprio = <number{0-8}>]
[maxpackets = <number{0-2500}>]
[loprio = <number{0-15}>]
[hiprio = <number{0-15}>]
where:
intf The name of the Transmit Queue. REQUIRED
weight Weight value of the chosen weight algorithm. OPTIONAL
subprio Sub Priority of the queue, evaluated against other channels
when strict priority is chosen.
OPTIONAL
maxpackets The maximum number of packets in the queues. OPTIONAL
loprio The lowest internal priority boundary for entering this
queue.
OPTIONAL
hiprio The highest internal priority boundary for entering this
queue.
OPTIONAL
To Next Page
Loading...
Need help?
General
