Technicolor TG670 User Manual

SNMP COMMANDS
1010
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
snmp targetparams add
Add target parameter entry.
SYNTAX:
snmp targetparams add paramname = <string>
[mpmodel = <{v1|v2c|v2u_v2|v3}>]
securitymodel = <{snmpv1|snmpv2c|usm}>
securityname = <{ROCommunity|SU|user|LanAdmin|
WanAdmin|PowerUser|TechAdmin|Administrator}>
securitylevel = <{noAuthNoPriv|authNoPriv|
authPriv}>
[storage = <{other|volatile|nonVolatile|
permanent|readOnly}>]
where:
paramname Configure a human readable string representing the namee
of this parameter.
REQUIRED
mpmodel Configure the message processing model used to determine
the type of notifications to send.
OPTIONAL
securitymodel Configure the security model used to determine the type of
notifications to send.
REQUIRED
securityname Configure a user name to be used in the notification. REQUIRED
securitylevel Configure the security level of the notification to send. REQUIRED
storage Configure the storage type. OPTIONAL
nickdj.co.uk

Technicolor TG670 Specifications

General

Brand	Technicolor
Model	TG670
Category	Network Router
Language	English