IPSEC COMMANDS
632
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
ipsec connection advanced modify
Changes a connection profile.
SYNTAX:
ipsec connection advanced
modify
name = <>
[peer = <>]
[localnetwork = <{retrieve_from_server|
black_ip|from_initiator}>]
[remotenetwork = <{retrieve_from_server|
allocated_virtual_ip|black_ip|
from_initiator}>]
[localmatch = <{exactly_|one_of_|subnet_of_|
subrange_of_|black_ip}>]
[remotematch = <{exactly_|one_of_|subnet_of_|
subrange_of_|black_ip}>]
[localselector = <>]
[remoteselector = <>]
[alwayson = <{disabled|enabled}>]
[descr = <{AES_SHA1_TUN|AES_MD5_TUN|
AES_SHA1_PFS_TUN|AES_MD5_PFS_TUN|
DES_SHA1_TUN|DES_MD5_TUN|AES_SHA1_Adv_TUN|
NullEnc_SHA1_TUN}>]
[options = <>]
[state = <{enabled|disabled}>]
where:
name The name of the connection profile to change. REQUIRED
peer Peer gateway profile. i.e. the gate to talk to. OPTIONAL
localnetwork Local trusted network (either a network attribute or a special
keyword for dynamic cases)
OPTIONAL
remotenetwork Remote trusted network (either a network attribute or a
special keyword for dynamic cases)
OPTIONAL
localmatch Phase 2 responder side localid matching OPTIONAL
remotematch Phase 2 responder side remoteid matching OPTIONAL
localselector Local traffic selector for this profile OPTIONAL
remoteselector Remote traffic selector for this profile OPTIONAL
alwayson Is this connection be on at all time, provided IPSec is
enabled?
OPTIONAL
descr Up to 4 phase two (IPSec) security descriptors separated by
|
OPTIONAL
options Connection options. OPTIONAL
state Enable/disable this connection profile. OPTIONAL
To Next Page
Loading...
Need help?
General
