DHCP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
197
dhcp server policy
Print DHCP server policy settings
SYNTAX:
dhcp server policy [verifyfirst = <{disabled|enabled}>]
[trustclient = <{disabled|enabled}>]
[rtbehaviour = <{traditional|standard|msft}>]
[ackinform = <{disabled|enabled}>]
where:
verifyfirst Enable/Disable IP address conflict network probing before
handing out an address to a client.
OPTIONAL
trustclient Whether or not the IP address suggested by a DHCP client
should be taken into account.
OPTIONAL
rtbehaviour Define the DHCP Server's route options behaviour.
The options that are involved are: 3, 33, 121 and 249.
"Traditional" will return 3 and/or 33; "standard" will return 3
and/or 33 or 121; "msft" will return 3 and/or 33 or 121 or 249
OPTIONAL
ackinform Enable/Disable DHCP inform acknowledgement for an
unknown lease
OPTIONAL
To Next Page
Loading...
Need help?
General
