LANGUAGE COMMANDS
722
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
language delete
Delete one or all language archives.
SYNTAX:
language delete [file = <string>]
[all = <{yes|no}>]
Config the device checker = <{yes|no}>
where:
file Filename : name of language archive to delete OPTIONAL
all Deletes all languages archives.Command: led devicecheck
config
OPTIONAL
Config the device checker Syntax : config [state = <{disabled|enabled}>] [physintf =
<{ethif1|ethif2|ethif3|ethif4|ethif5}>] [flashing = <{enabled|
disabled}>] [vlan = <{default|wan|dmz|guest}>]
REQUIRED
SYNTAX:
language delete [state = <{disabled|enabled}>]
[physintf = <{ethif1|ethif2|ethif3|ethif4|
ethif5}>]
[flashing = <{enabled|disabled}>]
[vlan = <{default|wan|dmz|guest}>]
where:
state Enable or disable device checker OPTIONAL
physintf The monitored port OPTIONAL
flashing Enable or disable the IPTV LED flashing OPTIONAL
vlan VLAN name OPTIONAL