CONNECTION COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
91
connection Commands
connection appconfig Modify a CONN/NAT application helper
configuration
see page 93
connection appinfo Display CONN/NAT application specific info see page 94
connection applist Display the available CONN/NAT application
helpers.
see page 95
connection bind Create a CONN/NAT application helper/port
binding.
see page 96
connection bindblacklist add Add bind blacklist entry. see page 97
connection bindblacklist delete Delete bind blacklist entry. see page 98
connection bindblacklist list List all bind blacklist entries. see page 99
connection bindlist Display the CONN/NAT application helper/
port bindings.
see page 100
connection clean Clean connection database by forcing timeouts. see page 101
connection clear Kill all connections. see page 102
connection debug Connection debug commands. see page 103
connection describe Describe the streams of a connection. see page 104
connection flow add Add flow see page 105
connection flow delete Delete flow see page 106
connection flow flush Flush flow configuration see page 107
connection flow list List all flows see page 108
connection flow qoslabeladd Assign qos label to flow see page 109
connection flow qoslabeldel Remove qos label from flow see page 110
connection flush Flush the connection configuration. see page 111
connection info Display all modules with some info. see page 112
connection list Display the currently known connections. see page 113
connection refresh Invalidate all cached decisions. see page 115
connection release Release connections. see page 116
connection reserve Reserve connections. see page 117
connection stats Display connection and stream statistics. see page 118
connection timerclear Clear connection timeout to default. see page 119
To Next Page
Loading...
Need help?
General
