VOICE COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
1239
voice services soc modify
Configure switching order codes
SYNTAX:
voice services soc modify function = <{HoldActiveCallAndEnableCallSetup|
NoActiveCallRetrieveHeld|
SwitchBetweenActiveAndHeld|
SwitchBetweenActiveAndWaiting}>
SOC = <{HF|HF1|HF2|HFTO|HFTOorHF2|HF3}>
where:
function Switching function REQUIRED
SOC Switching order code REQUIRED
To Next Page
Loading...
Need help?
General
