ROUTER COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
853
router bgp debug traceconfig
Configures the BGP daemon tracepoints
SYNTAX:
router bgp debug traceconfig [all = <{disabled|enabled}>]
[state = <{disabled|enabled}>]
[normal = <{disabled|enabled}>]
[policy = <{disabled|enabled}>]
[task = <{disabled|enabled}>]
[timer = <{disabled|enabled}>]
[route = <{disabled|enabled}>]
[openrecv = <{off|on|detailed}>]
[updatesrecv = <{off|on|detailed}>]
[notifrecv = <{off|on|detailed}>]
[kaprecv = <{off|on|detailed}>]
[opensend = <{off|on|detailed}>]
[updatessend = <{off|on|detailed}>]
[notifsend = <{off|on|detailed}>]
[kapsend = <{off|on|detailed}>]
[aspath = <{disabled|enabled}>]
where:
all Enable/Disable tracing of all events related with BGP OPTIONAL
state Enable/Disable tracing of protocol state transitions OPTIONAL
normal Enable/Disable tracing of normal protocol occurrences OPTIONAL
policy Enable/Disable tracing the policy functions OPTIONAL
task Enable/Disable tracing the routing processing associated
with BGP
OPTIONAL
timer Enable/Disable tracing the timer usage of BGP OPTIONAL
route Enable/Disable tracing the RIB table changes for routes
installed by BGP
OPTIONAL
openrecv Specifies the level of tracing the received 'OPEN' messages OPTIONAL
updatesrecv Specifies the level of tracing the received 'UPDATE'
messages
OPTIONAL
notifrecv Specifies the level of tracing the received
'NOTIFICATION' messages
OPTIONAL
kaprecv Specifies the level of tracing of the received 'KEEP ALIVE'
messages
OPTIONAL
opensend Specifies the level of tracing the sent 'OPEN' messages OPTIONAL
updatessend Specifies the level of tracing the sent 'UPDATE' messages OPTIONAL
To Next Page
Loading...
Need help?
General
