IPSEC COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
661
ipsec peer descriptor add
Adds a phase 1 (IKE) security descriptor.
SYNTAX:
ipsec peer descriptor add name = <string>
where:
name The name for the security descriptor. REQUIRED
To Next Page
Loading...
Need help?
General
