SYSLOG COMMANDS
1058
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
syslog msgbuf flush
Flush all messages in syslog message buffer.
SYNTAX:
syslog msgbuf flush [date = <dd/mm/yyyy>]
[time = <hh:mm:ss>]
[timezone = <(+ or -)hh:mm>]
[daylightsaving = <{disabled|enabled}>]
[geotimezonename = <{(UTC-12:00)|(UTC-11:00)|
(UTC-10:00)|(UTC-09:00)|(UTC-(UTC-03:30)|
(UTC-03:00)|(UTC-02:00)|(UTC-01:00)|(UTC)|(UTC
+01:00)|(UTC+02:00)|(UTC+03:00)|(UTC+03:30)|
(UTC+04:00)|(UTC+04:30)|(UTC+05:00)|(UTC
+05:30)|(UTC+05:45)|(UTC+06:00)|(UTC+06:30)|
(UTC+07:00)|(UTC+08:00)|(UTC+09:00)|(UTC
+09:30)|(UTC+10:00)|(UTC+11:00)|(UTC+12:00)|
(UTC+13:00)}>]
[rtc = <{disabled|enabled}>]
where:
date Set the system date OPTIONAL
time Set the system time OPTIONAL
timezone Set the system timezone(-12:00...+14:00 / 15 minute
resolution)
OPTIONAL
daylightsaving Enable/Disable daylight saving OPTIONAL
geotimezonename Set the geographical timezone by name OPTIONAL
rtc Enable/Disable the real time clock OPTIONAL
To Next Page
Loading...
Need help?
General
