ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
353
eth bridge filter config
Change filter configuration
SYNTAX:
eth bridge filter config brname = <{bridge}>
name = <{}>
[filter = <{}>]
where:
brname The name of an bridge. REQUIRED
name The name of the filter to configure. REQUIRED
filter Ethernet filter to used OPTIONAL