DHCP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
213
dhcp spoofing debug traceconfig
Display/modify DHCP spoofing trace configuratin
SYNTAX:
dhcp spoofing debug
traceconfig
[state = <{disabled|enabled}>]
Add a DNS server. = <{disabled|enabled}>
where:
state Enable/Disable tracing.Command: dns client dnsadd OPTIONAL
Add a DNS server. Syntax : dnsadd addr = <string> [port = <number>] REQUIRED
SYNTAX:
dhcp spoofing debug
traceconfig
addr = <string>
[port = <number>]
where:
addr The DNS server IP address. REQUIRED
port The DNS server port number. OPTIONAL
To Next Page
Loading...
Need help?
General
