ETH COMMANDS
468
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
eth switch mirror ingress
Enable or disable the specified port to be a Received Port Mirroring.
SYNTAX:
eth switch mirror ingress port = <number{1-5}>
[state = <{enabled|disabled}>]
where:
port The port. REQUIRED
state Enable/disable state. OPTIONAL
To Next Page
Loading...
Need help?
General
