ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
365
eth bridge ifconfig
Modify a bridge interface configuration.
SYNTAX:
eth bridge ifconfig [brname = <{bridge}>]
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt|vdsl2}>
[dest = <{}>]
[portstate = <{disabled|learning|forwarding}>]
[retry = <number{0-65535}>]
[priotag = <{disabled|enabled}>]
[vlan = <{default|wan|dmz|guest}>]
[prioconfig = <{disabled|overwrite|increase}>]
[ipprec = <{disabled|precedence|dscp}>]
[priority = <number{0-7}>]
[regenprio = <string>]
[ingressfiltering = <{disabled|enabled}>]
[acceptvlanonly = <{disabled|enabled}>]
[mcastfilter = <{disabled|enabled}>]
[dynvlan = <{disabled|enabled|switched}>]
[wan = <{disabled|enabled}>]
[igmpsnooping = <{disabled|enabled}>]
[priotransparent = <{disabled|enabled}>]
[bpdufiltering = <{disabled|enabled}>]
[xtratagging = <{none|c-vlan|s-vlan}>]
where:
brname The name of a bridge instance. OPTIONAL
intf The name of the bridge interface to configure. REQUIRED
dest The destination for this interface. Typically an ATM or a
physical interface name.
OPTIONAL
portstate The bridge portstate for this interface. OPTIONAL
retry The number of WAN connection setup retries before giving
up.
OPTIONAL
priotag Enable/Disable priority tagging. OPTIONAL
vlan The default VLAN. OPTIONAL
prioconfig The priority configuration for this interface. OPTIONAL
ipprec The IP precedence for this interface. OPTIONAL
priority The default priority for untagged ingress packets. OPTIONAL
regenprio The priority regeneration table for tagged ingress packets. OPTIONAL
To Next Page
Loading...
Need help?
General
