PPP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
801
ppp Commands
ppp flush Flush all PPP interfaces. see page 802
ppp ifattach Attach a PPP interface. see page 803
ppp ifconfig Modify a PPP interface. see page 804
ppp ifdelete Delete a PPP interface. see page 807
ppp ifdetach Detach a PPP interface. see page 808
ppp iflist Display the PPP interfaces. see page 809
ppp ifscan Scan a PPP interface for available interfaces. see page 810
ppp relay flush Remove all ethernet interfaces from the PPP
relay agent list and terminate all
see page 811
ppp relay ifadd Add an ethernet interface to the PPP relay list. see page 812
ppp relay ifconfig Modify an ethernet interface from the PPP relay
agent list.
see page 813
ppp relay ifdelete Delete an ethernet interface from the PPP relay
agent list.
see page 814
ppp relay iflist Display all ethernet interfaces added to the PPP
relay agent list.
see page 815
ppp relay sesslist Display all active PPP relay sessions. see page 816
ppp rtadd Add a route to the routing table when PPP link
comes up.
see page 817
ppp rtdelete Delete the route for a PPP link. see page 818
To Next Page
Loading...
Need help?
General
