ETH COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
391
eth bridge vlan ifadd
Add bridge interface to virtual LAN.
SYNTAX:
eth bridge vlan ifadd name = <{default|wan|dmz|guest}>
intf = <{OBC|ethport1|ethport2|ethport3|
ethport4|WLAN|virt|vdsl2}>
[untagged = <{disabled|enabled}>]
where:
name The VLAN name. REQUIRED
intf The name of the bridge interface to add to the VLAN. REQUIRED
untagged Enable/disable interface as untagged for this VLAN. OPTIONAL
To Next Page
Loading...
Need help?
General
