SNTP COMMANDS
1028
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
sntp config
Modify/Display configuration
SYNTAX:
sntp config [state = <{enabled|disabled}>]
[poll = <number{1-10080}>]
[pollpresync = <number{1-60}>]
[wanSubscribe = <{enabled|disabled}>]
where:
state Enable/Disable SNTP client OPTIONAL
poll polling interval (1 min, ... ,10080min(=7days)) OPTIONAL
pollpresync polling interval before first sync (1 min, ... ,60min) OPTIONAL
wanSubscribe Enable/Disable subscribe wan connection OPTIONAL
To Next Page
Loading...
Need help?
General
