NAT COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
789
nat Commands
nat config Modify global NAT configuration. see page 790
nat flush Flush current NAT configuration. see page 791
nat iflist Display all interfaces. see page 792
nat mapadd Add an address mapping to a nat enabled
interface.
see page 793
nat mapdelete Delete an address mapping from a nat enabled
interface.
see page 794
nat maplist Display address mappings. see page 795
nat tmpladd Add an address mapping template. see page 796
nat tmpldelete Delete an address mapping template. see page 798
nat tmplinst Instantiate address mapping templates for a
given dynamic address.
see page 799
nat tmpllist Display address mapping templates. see page 800
To Next Page
Loading...
Need help?
General
