Technicolor TG670 User Manual

PPTP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
821
pptp ifadd
Adds a PPTP profile (backwards compatible with previous release, use profiles
SYNTAX:
pptp ifadd dest = <string>
[rate = <number{10-10000}>]
[encaps = <{vcmux|nlpid}>]
[ac = <{never|always|keep}>]
To enable/disable LPD service. = <{never|
always|keep}>
where:
dest The WAN destination for this PPTP tunnel. Typically a
phonebook name.
REQUIRED
rate Transmit speed in kbits/s for the WAN link. OPTIONAL
encaps The WAN protocol encapsulation. OPTIONAL
ac Enable/disable sending address and control field (0xFF03)
on the WAN link.Command: printersharing LPD config
OPTIONAL
To enable/disable LPD service. Syntax : config [state = <{disabled|enabled}>] REQUIRED
SYNTAX:
pptp ifadd [state = <{disabled|enabled}>]
where:
state Enabled/disabled LPD printer service. OPTIONAL
nickdj.co.uk

Technicolor TG670 Specifications

General

Brand	Technicolor
Model	TG670
Category	Network Router
Language	English