SNMP COMMANDS
1016
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
snmp user delete
Delete a snmp user
SYNTAX:
snmp user delete securityname = <{SU|user|LanAdmin|WanAdmin|
PowerUser|TechAdmin|Administrator}>
snmpengineID = <string>
where:
securityname Delete an existing snmpv3 user. REQUIRED
snmpengineID The authoritative SNMP engine's administratively-
unique identifier, specified as hexadecimal numbers (00-
ff) and delimited with colons. Or use the default value
'localSnmpID' to refer to the snmpEngineID of the local
SNMP agent.
REQUIRED
To Next Page
Loading...
Need help?
General
