SNMP COMMANDS
E-DOC-CTC-20100729-0006 v3.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
999
snmp securitytogroup delete
Delete user from an access control group
SYNTAX:
snmp securitytogroup delete securitymodel = <{snmpv1|snmpv2c|usm}>
securityname = <{ROCommunity|RWCommunity|SU|
user|LanAdmin|WanAdmin|PowerUser|TechAdmin|
Administrator}>
where:
securitymodel Configure the security model. REQUIRED
securityname Configure the name of the user. REQUIRED
To Next Page
Loading...
Need help?
General
