Xerox 8850 Service Manual

03/2003
6-49
8850/ 510DP
SPS 510dp Change Tag Information
General Procedures
SPS 510dp Change Tag Information
Introduction
The purpose of this section is to list the Change Tag Index.
All important modifications are identified by a Tag number on a matrix card attached to the
machine.
This section describes all of the Tags as well as multinational applicability, classification codes,
and permanent or temporary modification information.
Classification Codes
A Tag number may be required to identify differences between parts that cannot be inter-
changed, or differences in diagnostic, repair, installation, or adjustment procedures. A Tag
number may also be required to identify the presence of optional hardware, special non-vola-
tile memory programming, or if mandatory modifications have been installed.
Each Tag number is given a classification code to identify the type of change the Tag has
made:
M - Mandatory
N - Not installed in the field
O - Optional
R - Repair
TAG: 1
CLASS: S
USE: ALL
MFG SERIAL NUMBERS:
NAME: 8850 TAGS
PURPOSE: To indicate that all 8850 tags that are applicable are built into the SPS510dp.
KIT NUMBER: N/A
REFERENCE: N/A

Xerox 8850 Specifications

General

Brand	Xerox
Model	8850
Category	Printer
Language	English