2 Installation and Commissioning, IRC5
2.9.10. Installation of Hot plug
3HAC021313-001 Revision: K148
© Copyright 2004-2008 ABB. All rights reserved.
Procedure Dual Cabinet Controller
The procedure below details how to install the hot plug button in the Dual Cabinet Controller.
Action Note/Illustration
1.
DANGER!
Before any work inside the cabinet, please
observe the safety information in section
DANGER - Make sure that the main power
has been switched off! on page 28.
2.
esd
WARNING!
The unit is sensitive to ESD, before
handling the unit please observe the safety
information in section WARNING - The unit
is sensitive to ESD! on page 29
3. Disconnect the cable from the ethernet
connector for FlexPendant on the computer
unit.
DSQC623:
xx0400000960
• A: Connector A32.A8
DSQC639:
xx0600002897
• A: FlexPendant port
Slot 1 Slot 2 Slot 3
Slot 4
Slot 5
Continued
Continues on next page
To Next Page
Loading...
Need help?
General
