To Next Page

To Previous Page

5 Reference information, IRC5

5.5. Standard toolkit, IRC5

3173HAC021313-001 Revision: K

5.5. Standard toolkit, IRC5

General

All service (repair, maintenance and installation) instructions contain lists of tools required to

perform the specified activity. All special tools, i.e. all tools that are not considered standard

as defined below, are listed in their instructions respectively.

This way, the tools required are the sum of the Standard Toolkit and any tools listed in the

instruction.

Contents, standard toolkit, IRC5

Tool Remark

Screw driver, Torx Tx10

Screw driver, Torx Tx20

Screw driver, Torx Tx25

Ball tipped screw driver, Torx Tx25

Screw driver, flat blade 4 mm

Screw driver, flat blade 8 mm

Screw driver, flat blade 12 mm

Screw driver Phillips-1

Box spanner 8 mm

ABB IRC5 User Manual

Other manuals for ABB IRC5