Cisco WS-C6506 User Manual

32-4
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 32 Configuring UDLD
Configuring UDLD on the Switch
Disabling UDLD on Individual Ports
To disable UDLD on the individual ports, perform this task in privileged mode:
This example shows how to disable UDLD on port 4/1:
Console> (enable) set udld disable 4/1
UDLD disabled on port 4/1.
Console> (enable)
Disabling UDLD Globally
To disable UDLD globally on the switch, perform this task in privileged mode:
This example shows how to disable UDLD globally on the switch:
Console> (enable) set udld disable
UDLD disabled globally
Console> (enable)
Specifying the UDLD Message Interval
To specify the UDLD message interval, perform this task in privileged mode:
This example shows how to specify the UDLD message interval on the switch:
Console> (enable) set udld interval 20
UDLD message interval set to 20 seconds
Console> (enable)
This example shows how to verify the message interval on the switch:
Console> (enable) show udld
UDLD : enabled
Message Interval : 20 seconds
Console> (enable)
Task Command
Step 1
Disable UDLD on a specific port. set udld disable mod/port
Step 2
Verify the configuration. show udld port [mod[/port]]
Task Command
Step 1
Disable UDLD globally on the switch. set udld disable
Step 2
Verify the configuration. show udld
Task Command
Step 1
Specify the UDLD message interval. set udld interval interval
Step 2
Verify the configuration. show udld

Cisco WS-C6506 Specifications

General

Brand	Cisco
Model	WS-C6506
Category	Switch
Language	English