Copyright 2013 Baker Hughes Company.
120 | DPI620G Instruction Manual–English
Chapter 9. HART® Operations
9.5.8 Open a HART® Offline Configuration
After the offline setup (either connected or disconnected) is made, use this option from the HART
Of
fline menu to read the setup file.
Figure 9-18: HART Offline – Saved Configuration Files Selection
Select the necessary setup to load from the saved files.
9.5.9 File Management
Use the FILE MANAGEMENT menu to copy or delete HART setup files.
Figure 9-19: HART Offline – Configuration File Management
Note: When you copy to or from a USB flash memory device, make sure that you have fully
connected the USB flash memory device before you select the menu option.
To Next Page
Loading...
Need help?
General
