Copyright 2013 Baker Hughes Company.
English–DPI620G Instruction Manual | 129
HART® Configurations
9.10 HART® Configurations
9.10.1 HART® – Uploading the Configuration
You can tap the Upload icon in the Commands menu, to upload the setup to the connected
device.
9.10.2 HART® – Working with Saved Configurations
Select a Saved Configuration from the primary offline menu to let you do the following operations:
• Open HART Config - This lets you change a previously saved HART setup file.
• Upload Config to Device -This lets you upload a previously saved HART setup file to a
connected device.
9.10.3 Copy HART® Configuration to USB
This lets a previously saved HART setup file be saved to a USB flash drive. The USB flash drive
m
u
st be inserted into the DPI620G before you select this option.
After you copy the HART setup file to the USB flash drive, you can modify, copy or clone it on a
PC
.
9.10.4 Delete HART® Configuration
Erases the HART setup file from the DPI620G.
9.10.5 Delete All HART Setup Files
From the primary offline menu, tap the “Select All” icon and then the Delete icon: all
saved setup files are then erased.
9.10.6 Import Setup Files from USB Flash Drive
Insert a USB flash drive that holds saved configuration files. From the primary offline menu, tap
t
h
e New Configuration icon.
INFORMATION Any files on the DPI620G with the same name as files on the
USB flash drive will be overwritten.
To Next Page
Loading...
Need help?
General
